JACOB®

BN 22091 - Prvky pro vyrovnání tlaku s metrickým závitem standartní

Body: polyamide PA 6 V-0
Membrane: polyethersulfone PES
O-ring: Nitrile rubber NBR
Connecting thread: metric, as per EN 60423
Protection for hermetically sealed electro-technical and electronic enclosures against condensation water from alternating temperature and pressure, continuous ventilation and adaption of the inner pressure, hydrophobic and oleohpobic PES-mebrane
Polyamide material fulfils UL94 V-0
Typical air flow: >400 ml/min/cm² at
Δp = 0,07 bar
Water entry pressure: ≥0,83 bar (dynamic WEP, 30 seconds)
Temperature range: -40 °C ... +100 °C
Protection grade: IP66 / IP68 - 0,6 bar (60 min.) / IP69

Značka	Značka JACOB®
Materiál	Materiál Polyamid
Material execution	Material execution PA 6
Provedení	Provedení standartní
Notes on use	Notes on use

Toutes les caractéristiques

Variantes de produits

Caractéristiques

Body: polyamide PA 6 V-0
Membrane: polyethersulfone PES
O-ring: Nitrile rubber NBR
Connecting thread: metric, as per EN 60423
Protection for hermetically sealed electro-technical and electronic enclosures against condensation water from alternating temperature and pressure, continuous ventilation and adaption of the inner pressure, hydrophobic and oleohpobic PES-mebrane
Polyamide material fulfils UL94 V-0
Typical air flow: >400 ml/min/cm² at
Δp = 0,07 bar
Water entry pressure: ≥0,83 bar (dynamic WEP, 30 seconds)
Temperature range: -40 °C ... +100 °C
Protection grade: IP66 / IP68 - 0,6 bar (60 min.) / IP69

The pressure balance element has no function if it is blocked with dust and / or submerged in water.

All listed parts
- are in accordance with EN 45545-2, clause 4.5 "Non-listed products" with
- exposed areas ≤ 0,20 m², location interior, R22
- exposed areas ≤ 0,20 m², location exterior, R23
- have according to EN 45545-2, clause 4.3.2, Rule 1 total, combustible / flammable mass of the products
< 100 g for grouped products, location interior
< 400 g for grouped products, location exterior