KEENSERTS® KNT 01/03
BN 2086 - 手動安裝工具 適用螺紋襯套帶鎖定鍵重型重型KNHM / KNHML
Eigenschaften
| 品牌 |
品牌
KEENSERTS®
|
| 品牌類型 |
品牌類型
KNT 01/03
|
| 材質 |
材質
碳鋼
|
裝配
1. Screw the KEENSERTS® inserts onto the threaded pin of the KNT – Tool.
2. Screw the KEENSERTS® inserts in workpiece with KNT - Tool until the locking kees stop at the chamfer (recommended hole preparation)
3. Drive the kees with short and precise hammer strokes or via press ca. 1/3 in the workpiece. The kees can be controlled after each stroke.
4. Drive in the kees completely until they are flushed with the surface (end position)
5. Unscrew the KNT - Tool. The KEENSERTS® inserts is installed.