Lifting eye nuts

Product information: Instruction manual
Other documentation: CE Declaration of Conformity

Observe user information according to DIN 582.
Supply possibilities for fine threads and other types of threads on request.

Lifting eye nuts according to this specification are primarily used as static load-bearing devices for permanent attachment to the object.
Taking into account a safety factor in relation to the minimum breaking force according to the standard, ring nuts have the load capacities (kg) specified in the table for single-strand fastening.
The load capacities in the table assume that:
- the ring nut is fully screwed on,
- the ring nut rests flat and fully on the bearing surface,
- the length of the counter-thread is sufficient,
- the strength of the element with the mating thread (screw) is sufficient,
- there are no shock loads,
- there ia a permissible temperature range from -20 °C ... +200 °C.

Max. load capacity in kg depending on the load direction
A: axial per eye nut
B: per eye nut ≤ 45°
C: each eye nut > 45° to 60° or the side of each eye nut ≤ 45°
Lifting eye nuts must always be tightened to the contact surface. Transverse loads are not allowed. To ensure the correct position, suitable washers must be used.
Washer is required under screw head.
The table specifications must not be added for multi-strand load supports.

Note: Lifting eye nuts must be checked for tight fit and obvious damage (corrosion, cracks, impact marks, deformation) before use.
Lifting eye nuts must not be exposed to chemical influences (in particular acids, acid vapors and pickling).
Lifting eye nuts with obvious deformations or other damage must no longer be used. Subsequent color coding of the ring nuts, especially in red, should be avoided in order to prevent the risk of confusion with high-strength attachment points. Lateral tensile load must be avoided!