TufLok® and Nytemp® Patch all-round

TufLok^® and Nytemp^® are reliable economic systems for sealing screw connections. A highly elastic, wear-resistant nylon coating is applied to part of the thread. At the same time, it fills the axial backlash between the screw and nut thread, creating a connection.

Features:

Fluid and gas-tight seal
No drying time whatsoever required immediately capable of withstanding stress
Suitable for almost all metallic materials
Unlimited storage life
Resistant to alcohol, oil, petrol and most thinners

Internal thread must have a countersink (no sharp-edged threads inserts), otherwise the patch could be peeled off when the screw is installed. Nytemp^® can only be used on plain or phosphate parts and on stainless steel due to the higher coating temperature.

Securing screws with TufLok^®/Nytemp^® Patch. Threaded seal with TufLok^®/Nytemp^® Patch all-round. Free threads on thread end enable easy installation. 2–3 threads underneath the head should not be patched.

Threaded parts from M1 to M68. Lengths up to 220 mm.

TufLok^® Patch all-round

Color blue
Temperature range –50 °C to 120 °C

Nytemp^® Patch all-round

Color orange
Temperature range –50 °C to 200 °C

Normal coating:

Length l1: ~4 to 6 threads
Length l2: ~1 to 2 threads

d₁ Thread diameter
l₁ Patch length
l₂ start of unpatched thread

Chamfer 90° - 120°, Ø =1.05 Ød₁

TufLok® and Nytemp® Patch all-round

Get in contact with one of our experts